UniKey Burner Tool: Difference between revisions

From SecuTech Wiki
Jump to navigationJump to search
← Older editNewer edit →

Joseph (talk | contribs)

0 edits
No edit summary
Joseph (talk | contribs)
0 edits
No edit summary
Line 2: Line 2:
[[category:UniKey_Tools]]
[[category:UniKey_Tools]]


'''Unikey Burner''' is a tool for buning Unikey in single or in a batch
==UniKey Burner Tool==


Getting Started
UniKey Burner is a tool for "hardcoding" settings onto a single or multiple UniKey device(s).


1. Double-click the Burner icon.
The Burner tool for UniKey STD, PRO and Time can be found within the UniKey SDK under the directory


2. The Unikey Burner window will appear. To begin with setting, enter the previous 4 passwords (factory default 1234) respectively. If you want to generate new passwords, pick Generate New Passwords and input the initial SEED (maximum 10 digits number). The new passwords will be generated automatically by this burner application.
<code>UniKey SDK\Utilities\Burner\</code>


Next, choose the Soft ID Generate Method. We offer 4 different Soft ID Generate Modes, which are All the same, Increase, Decrease and As Time/Date, which you can chose any method to achieve your purpose.
The Burner tool for UniKey Drive can be found within the UniKey Drive SDK under the directory


Caution! You must input the New SID value, to use All the same, Increase and Decrease.
<code>UniKey Drive SDK\Utilities\Burner\</code>
Click the  to load the *.UKY Files (created by Unikey Console).


[[Image:UniKey_Burner_Tool_Pic01.jpg]]
===Using the Burner Tool===


You can save all your settings to a specified file by click Save, or click Reset to clear all your settings. You can also load your previous settings by clicking Load.
1. Launch the Burner tool.


3. After finishing all the Setting, Plug the Unikey to USB port. Click the Burning tag. If you want to burn more one Unikey, please pick Batch. Click Run.
2. After the Burner tool has launched, the Burner window will appear on the "Setting" tab by default. To begin configuring settings, input the four passwords in each PW1 to PW4 fields respectively (Factory default "1234"). To generate a new password, tick the "Generate New Passwords" and input the initial seed value<ref name=Seed/> into the [SEED] field (Maximum 10 digit number). The new password is automatically generated using the given seed.


[[Image:UniKey_Burner_Tool_Pic02.jpg]]
3. Next, choose the "SID Generation Method". Four methods of generating the software ID (SID) of the UniKey device(s) can be chosen:
<table border="1">
<tr>
<th>Method</th>
<th>Description</th>
</tr>
<tr>
<td>All the same</td>
<td>The same SID for all UniKey devices.</td>
</tr>
<tr>
<td>As Time/Date</td>
<td>The SID as the current time and date when set.</td>
</tr>
<tr>
<td>Increase</td>
<td>The SID as incremented by one from the previous SID.</td>
</tr>
<tr>
<td>Decrease</td>
<td>The SID as decremented by one from the previous SID.</td>
</tr>
</table>


The Progress Bar shows the burning progress percentage, and you can check the burning progress details from the Progress message box.
<!--Check-->Under "UKY Files", click the [...] icon to load *.UKY files from the UniKey Console tool.


4. Remove you Unikey after finish and click “X” to, in the upper-right corner of the window to exit the program.
[[Image:UniKey_Burner_Tool_Pic01.jpg|370px]]
If you pick In Batch option, a window will pop up to remind you to change another Unikey device. Plug another one. Click OK to continue. Repeat step 4 will burn more Unikey, and click “X” to exit.
 
<!--[New SID] field?-->
 
All settings on under the "Setting" tab can be saved and later loaded for quick burning of UniKey devices. Settings can be saved to a specified file by clicking [Save], and likewise settings can be loaded through [Load]. To reset settings, click [Reset].
 
4. After configuring all settings, plug the UniKey device to burn in an available USB port.
'''Caution''': Ensure the UniKey device to burn is the correct one by ensuring only the involved UniKey device is plugged in.
 
To burn multiple UniKey device, tick the box "In Batch", otherwise leave it unchecked to burn a single device.
 
Once ready, click [Burn].
 
'''Important! Do not remove the UniKey device during the burning process. Doing so will cause severe damage to the device.'''
 
[[Image:UniKey_Burner_Tool_Pic02.jpg|370px]]
 
The progress bar will display the percentage of completion below the "Progress" window, where details of the burning process can be viewed.
 
5. Once completed, remove the UniKey device and click "X" to exit.
If the [In Batch] option was selected, a window notifying to plug the next UniKey device to burn will popup. Remove and plug the next UniKey device, then click [OK] to continue, otherwise click "X" to exit.


[[Image:UniKey_Burner_Tool_Pic03.jpg]]
[[Image:UniKey_Burner_Tool_Pic03.jpg]]


If you want to check the burning record, click the Record tag. All the burning records will be saved in the burn.log file automatically. New passwords will be listed in the record, if you choose generate new passwords in your setting.
6. After burning settings to a UniKey device(s), output logs can be viewed from the "Record" tab. All burning records are automatically saved in the burn.log file, including newly generated passwords if "Generate New Passwords" was selected.


[[Image:UniKey_Burner_Tool_Pic04.jpg]]
[[Image:UniKey_Burner_Tool_Pic04.jpg|370px]]


Click Print to print the log files. And a Burner Log file will automatically be created and located in the same directory with Burner.e
To print the log file, click [Print].


'''Important! Please don’t remove your Unikey when the burning process is executed. It will cause severe damage on your device.'''
==Notes==
{{reflist|refs=
<ref name=Seed>See [https://en.wikipedia.org/wiki/Random_seed Random Seed] for explanatory information.</ref>
}}

Revision as of 16:29, 16 July 2012


UniKey Burner Tool

UniKey Burner is a tool for "hardcoding" settings onto a single or multiple UniKey device(s).

The Burner tool for UniKey STD, PRO and Time can be found within the UniKey SDK under the directory

UniKey SDK\Utilities\Burner\

The Burner tool for UniKey Drive can be found within the UniKey Drive SDK under the directory

UniKey Drive SDK\Utilities\Burner\

Using the Burner Tool

1. Launch the Burner tool.

2. After the Burner tool has launched, the Burner window will appear on the "Setting" tab by default. To begin configuring settings, input the four passwords in each PW1 to PW4 fields respectively (Factory default "1234"). To generate a new password, tick the "Generate New Passwords" and input the initial seed value[1] into the [SEED] field (Maximum 10 digit number). The new password is automatically generated using the given seed.

3. Next, choose the "SID Generation Method". Four methods of generating the software ID (SID) of the UniKey device(s) can be chosen:

Method Description
All the same The same SID for all UniKey devices.
As Time/Date The SID as the current time and date when set.
Increase The SID as incremented by one from the previous SID.
Decrease The SID as decremented by one from the previous SID.

Under "UKY Files", click the [...] icon to load *.UKY files from the UniKey Console tool.


All settings on under the "Setting" tab can be saved and later loaded for quick burning of UniKey devices. Settings can be saved to a specified file by clicking [Save], and likewise settings can be loaded through [Load]. To reset settings, click [Reset].

4. After configuring all settings, plug the UniKey device to burn in an available USB port. Caution: Ensure the UniKey device to burn is the correct one by ensuring only the involved UniKey device is plugged in.

To burn multiple UniKey device, tick the box "In Batch", otherwise leave it unchecked to burn a single device.

Once ready, click [Burn].

Important! Do not remove the UniKey device during the burning process. Doing so will cause severe damage to the device.

The progress bar will display the percentage of completion below the "Progress" window, where details of the burning process can be viewed.

5. Once completed, remove the UniKey device and click "X" to exit. If the [In Batch] option was selected, a window notifying to plug the next UniKey device to burn will popup. Remove and plug the next UniKey device, then click [OK] to continue, otherwise click "X" to exit.

6. After burning settings to a UniKey device(s), output logs can be viewed from the "Record" tab. All burning records are automatically saved in the burn.log file, including newly generated passwords if "Generate New Passwords" was selected.

To print the log file, click [Print].

Notes

Template:Reflist

  1. ↑ Cite error: Invalid <ref> tag; no text was provided for refs named Seed
Retrieved from "https://esecutech.com/wiki/index.php?title=UniKey_Burner_Tool&oldid=744"