UniKey Burner Tool: Difference between revisions

From SecuTech Wiki
Jump to navigationJump to search
← Older edit

Cynthia (talk | contribs)

0 edits
Joseph (talk | contribs)
0 edits
No edit summary
Cynthia (talk | contribs)
0 edits
 
(19 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[category:UniKey_Burner_Tool]]
[[category:UniKey Manuals]]
[[category:UniKey_Tools]]
==<b>UniKey Burner</b>==


==UniKey Burner Tool==
<b><i>Version 8.4</i></b>


UniKey Burner is a tool for "hardcoding" settings onto a single or multiple UniKey device(s).
<table class="wikitable">
<tr>
  <td style="background-color: red;"><b style="color: #fff;">Version</b></td>
  <td>1.0</td>
  <td>1.1</td>
  <td>1.2</td>
  <td>1.3</td>
  <td>2.0</td>
  <td>2.1</td>
  <td>2.2</td>
  <td>3.0</td>
  <td>4.0</td>
  <td>5.0</td>
  <td>6.0</td>
  <td>7.0</td>
  <td>7.1</td>
  <td>7.3</td>
  <td>8.0</td>
  <td>8.1</td>
  <td>8.2</td>
  <td>8.3</td>
  <td>8.4</td>
</tr>
<tr>
  <td style="background-color: red;"><b style="color: #fff;">Date</b></td>
  <td>2006.1</td>
  <td>2006.8</td>
  <td>2006.10</td>
  <td>2006.12</td>
  <td>2007.2</td>
  <td>2007.4</td>
  <td>2007.8</td>
  <td>2008.5</td>
  <td>2008.8</td>
  <td>2009.3</td>
  <td>2010.4</td>
  <td>2010.6</td>
  <td>2010.8</td>
  <td>2010.9</td>
  <td>2012.3</td>
  <td>2012.4</td>
  <td>2016.5</td>
  <td>2016.7</td>
  <td>2018.2</td>
</tr>
</table>
 
==Introduction==
 
UniKey Burner is a tool for burning/setting up individual UniKey dongles, or in a batch.


The Burner tool for UniKey STD, PRO and Time can be found within the UniKey SDK under the directory
The Burner tool for UniKey STD, PRO and Time can be found within the UniKey SDK under the directory:


<code>UniKey SDK\Utilities\Burner\</code>
<code>UniKey SDK\Utilities\Burner\</code>


The Burner tool for UniKey Drive can be found within the UniKey Drive SDK under the directory
The Burner tool for UniKey Drive can be found within the UniKey Drive SDK under the directory:


<code>UniKey Drive SDK\Utilities\Burner\</code>
<code>UniKey Drive SDK\Utilities\Burner\</code>


===Using the Burner Tool===
==Setting==
 
To begin configuring the UniKey Burner tool, please input the 4 passwords as set for the connected UniKey. Tick the Generate New Passwords box and enter a numerical value into "SEED" to generate new passwords based off the seeding value. Please input a maximum of 8 digits into the "SEED" box. A new password will be generated by the burner tool automatically. In the SID (Software Identity) Generation Method, there are 4 different SID generation modes:
1. Launch the Burner tool.
 
2. After the Burner tool has launched, the Burner window will appear on the "Setting" tab by default. To begin configuring settings, input the four passwords in each PW1 to PW4 fields respectively (Factory default "1234"). To generate a new password, tick the "Generate New Passwords" and input the initial seed value<ref name=Seed/> into the [SEED] field (Maximum 10 digit number). The new password is automatically generated using the given seed.
 
3. Next, choose the "SID Generation Method". Four methods of generating the software ID (SID) of the UniKey device(s) can be chosen:
<table border="1">
<tr>
<th>Method</th>
<th>Description</th>
</tr>
<tr>
<td>All the same</td>
<td>The same SID for all UniKey devices.</td>
</tr>
<tr>
<td>As Time/Date</td>
<td>The SID as the current time and date when set.</td>
</tr>
<tr>
<td>Increase</td>
<td>The SID as incremented by one from the previous SID.</td>
</tr>
<tr>
<td>Decrease</td>
<td>The SID as decremented by one from the previous SID.</td>
</tr>
</table>
 
<!--Check-->Under "UKY Files", click the [...] icon to load *.UKY files from the UniKey Console tool.
 
[[Image:UniKey_Burner_Tool_Pic01.jpg|370px]]
 
<!--[New SID] field?-->
 
All settings on under the "Setting" tab can be saved and later loaded for quick burning of UniKey devices. Settings can be saved to a specified file by clicking [Save], and likewise settings can be loaded through [Load]. To reset settings, click [Reset].
 
4. After configuring all settings, plug the UniKey device to burn in an available USB port.
'''Caution''': Ensure the UniKey device to burn is the correct one by ensuring only the involved UniKey device is plugged in.
 
To burn multiple UniKey device, tick the box "In Batch", otherwise leave it unchecked to burn a single device.


Once ready, click [Burn].
* All the same: All UniKeys created by the UniKey burner under the current session will have the same SID.
* Increase: The UniKey SID will increment after each successful creation.
* Decrease: The UniKey SID will decrease after each successful creation.
* Time/Date: The new UniKey SID will be based off the time and date of creation
Please click on the [<b>...</b>] button under UKY Files to load the settings .uky created by the UniKey Console tool.


'''Important! Do not remove the UniKey device during the burning process. Doing so will cause severe damage to the device.'''
[[File:burner setting.png|500px|alt=UniKey Burner settings tab]]


[[Image:UniKey_Burner_Tool_Pic02.jpg|370px]]
The "Save" button saves all the settings to a file, "Load" button will re-open the settings from a file set previously, and "Reset" clears all settings.


The progress bar will display the percentage of completion below the "Progress" window, where details of the burning process can be viewed.
<div style="page-break-before:always"></div>


5. Once completed, remove the UniKey device and click "X" to exit.
==Burning==
If the [In Batch] option was selected, a window notifying to plug the next UniKey device to burn will popup. Remove and plug the next UniKey device, then click [OK] to continue, otherwise click "X" to exit.
Once all the settings have been made, please insert a UniKey into the USB port. By clicking on the Burn button, the current settings will be set on the UniKey. Please tick "In Batch" if you wish to burn multiple UniKeys.


[[Image:UniKey_Burner_Tool_Pic03.jpg]]
[[File:burning burning.png|500px|alt=UniKey Burner burning tab]]


6. After burning settings to a UniKey device(s), output logs can be viewed from the "Record" tab. All burning records are automatically saved in the burn.log file, including newly generated passwords if "Generate New Passwords" was selected.
The Progress bar shows the progress percentage, and status feedback is provided by the progress details message box above. Once burning has completed, please remove the UniKey from the port. <b><em>DO NOT REMOVE THE UniKey WHILST IT IS BEING WRITTEN</em></b>. If the In Batch option has been ticked, the pop up below will indicate when it is safe to remove and insert a new UniKey.


[[Image:UniKey_Burner_Tool_Pic04.jpg|370px]]
[[File:unikey burner insert next dongle.png|alt=please insert the next UniKey Drive]]


To print the log file, click [Print].
==Record==
The "Record" tab shows the work done by UniKey Burner, the "Print" button allows you to print information for your own records.


==Notes==
[[File:burner record.png|500px|alt=UniKey Burner record tab]]
{{reflist|refs=
<ref name=Seed>See [https://en.wikipedia.org/wiki/Random_seed Random Seed] for explanatory information.</ref>
}}

Latest revision as of 15:40, 12 February 2018

UniKey Burner

Version 8.4

Version 1.0 1.1 1.2 1.3 2.0 2.1 2.2 3.0 4.0 5.0 6.0 7.0 7.1 7.3 8.0 8.1 8.2 8.3 8.4
Date 2006.1 2006.8 2006.10 2006.12 2007.2 2007.4 2007.8 2008.5 2008.8 2009.3 2010.4 2010.6 2010.8 2010.9 2012.3 2012.4 2016.5 2016.7 2018.2

Introduction

UniKey Burner is a tool for burning/setting up individual UniKey dongles, or in a batch.

The Burner tool for UniKey STD, PRO and Time can be found within the UniKey SDK under the directory:

UniKey SDK\Utilities\Burner\

The Burner tool for UniKey Drive can be found within the UniKey Drive SDK under the directory:

UniKey Drive SDK\Utilities\Burner\

Setting

To begin configuring the UniKey Burner tool, please input the 4 passwords as set for the connected UniKey. Tick the Generate New Passwords box and enter a numerical value into "SEED" to generate new passwords based off the seeding value. Please input a maximum of 8 digits into the "SEED" box. A new password will be generated by the burner tool automatically. In the SID (Software Identity) Generation Method, there are 4 different SID generation modes:

  • All the same: All UniKeys created by the UniKey burner under the current session will have the same SID.
  • Increase: The UniKey SID will increment after each successful creation.
  • Decrease: The UniKey SID will decrease after each successful creation.
  • Time/Date: The new UniKey SID will be based off the time and date of creation

Please click on the [...] button under UKY Files to load the settings .uky created by the UniKey Console tool.

UniKey Burner settings tab

The "Save" button saves all the settings to a file, "Load" button will re-open the settings from a file set previously, and "Reset" clears all settings.

Burning

Once all the settings have been made, please insert a UniKey into the USB port. By clicking on the Burn button, the current settings will be set on the UniKey. Please tick "In Batch" if you wish to burn multiple UniKeys.

UniKey Burner burning tab

The Progress bar shows the progress percentage, and status feedback is provided by the progress details message box above. Once burning has completed, please remove the UniKey from the port. DO NOT REMOVE THE UniKey WHILST IT IS BEING WRITTEN. If the In Batch option has been ticked, the pop up below will indicate when it is safe to remove and insert a new UniKey.

please insert the next UniKey Drive

Record

The "Record" tab shows the work done by UniKey Burner, the "Print" button allows you to print information for your own records.

UniKey Burner record tab

Retrieved from "https://esecutech.com/wiki/index.php?title=UniKey_Burner_Tool&oldid=764"