UniKey Init Tool - Revision history

Cynthia: /* Initing */

2018-02-13T04:15:40Z

Initing

← Older revision		Revision as of 15:15, 13 February 2018
Line 73:		Line 73:
	[[File:initing.png\|thumb\|none\|500px\|alt=UniKey Drive Init tool initializing tab\|<b>If the UniKey Drive is removed during the initialization process, it may cause severe damage to that UniKey Drive.</b>]]		[[File:initing.png\|thumb\|none\|500px\|alt=UniKey Drive Init tool initializing tab\|<b>If the UniKey Drive is removed during the initialization process, it may cause severe damage to that UniKey Drive.</b>]]

	Please tick the 'In batch' button to create multiple copies of the same settings on multiple UniKey Drives. The Init button starts the burn process; this process will format your UniKey Drive. The progress bar shows the burning process percentage, and the Progress box provides details about the current operation. Once the Progress box outputs: Initialized successfully!. It is safe to remove the UniKey Drive. If the 'In batch' option is ticked, the following pop up will appear.		Please tick the 'In batch' button to create multiple copies of the same settings on multiple UniKey Drives. The Init button starts the burn process; this process will format your UniKey Drive, replace the existing settings with the newly configured settings. The progress bar shows the burning process percentage, and the Progress box provides details about the current operation. Once the Progress box outputs: Initialized successfully!. It is safe to remove the UniKey Drive. If the 'In batch' option is ticked, the following pop up will appear.

	[[File:in batch.png\|300px\|alt=UniKey Drive in batch burning]]		[[File:in batch.png\|300px\|alt=UniKey Drive in batch burning]]

Cynthia: /* Initing */

2018-02-13T04:14:35Z

Initing

← Older revision		Revision as of 15:14, 13 February 2018
Line 77:		Line 77:
	[[File:in batch.png\|300px\|alt=UniKey Drive in batch burning]]		[[File:in batch.png\|300px\|alt=UniKey Drive in batch burning]]

	It is now safe for you to remove the current UniKey Drive, and insert the next UniKey Drive to be ~~burned~~.		It is now safe for you to remove the current UniKey Drive, and insert the next UniKey Drive to be initiated.

	==Record==		==Record==
	In the Record tab, initialization details are chronologically listed and a Print button is provided for your own records.		In the Record tab, initialization details are chronologically listed and a Print button is provided for your own records.

Cynthia: /* Settings */

2018-02-13T04:04:37Z

Settings

← Older revision		Revision as of 15:04, 13 February 2018
Line 59:		Line 59:

	==Settings==		==Settings==
	In the settings tab, a software vendor has the ability to set the partition size of UniKey Drive and set which .iso image to use for the CD-ROM emulation.		In the settings tab, a software vendor has the ability to set the partition size of UniKey Drive and set which .iso image to use for the CD-ROM emulation by the UniKey Drive.
	* To set the Virtual CD-ROM emulation, please enter the location of the desired file or use the button next to the text box. Please note that you must have an image loaded, all 4 partitions must be created. In the directory with the Init tool launcher, a sample .iso image is provided which contains an autorun.inf and the UniKey Drive Entry tool.		* To set the Virtual CD-ROM emulation, please enter the location of the desired file or use the button next to the text box. Please note that you must have an image loaded and all 4 partitions must be created. In the directory with the Init tool launcher, a sample .iso image is provided which contains an autorun.inf and the UniKey Drive Entry tool.
	* The Hidden Drive partition is the area used to store sensitive data. This area is not accessible by any means other than pre-programmed commands using the API.		* The Hidden Drive partition is the area used to store sensitive data. This area is not accessible by any means other than pre-programmed commands using the API.
	* The General/Protected Drive physical capacity slider allows control over the available space the end user has access to on the UniKey Drive. Please note that the Protected Drive requires a password to log into, whilst the General Drive is accessible to anyone.		* The General/Protected Drive physical capacity slider allows vendors control over the available space the end user has access to on the UniKey Drive. Please note that the Protected Drive requires a password to log into, whilst the General Drive is accessible to anyone.
	* Secure password input is required to make any changes to the UniKey.		* Secure password input is required to make any changes to the UniKey. The default key is 123456.

	To clear all your settings back to default, please click on the Reset button. The Save button creates an .ini file with the configurations made above, Load allows you to load a previously created .ini file. All fields must be filled and valid, the Virtual CD-ROM must ~~have~~ an image file, ~~and~~ a warning message will be displayed if a field ~~has not filled~~.		To clear all your settings back to default, please click on the Reset button. The Save button creates an .ini file with the configurations made above, Load allows you to load a previously created .ini file. All fields must be filled and valid, the Virtual CD-ROM must be loaded with an image file. Otherwise, a warning message will be displayed if a field is left empty.

	==Initing==		==Initing==

Cynthia: /* UniKey Drive Init Tool */

2018-02-13T03:49:08Z

UniKey Drive Init Tool

← Older revision		Revision as of 14:49, 13 February 2018
Line 3:		Line 3:
	<b><em>Please note that this section is only for the UniKey Drive.</em></b>		<b><em>Please note that this section is only for the UniKey Drive.</em></b>

	<b><i>Version 8.3</i></b>		<b><i>Version 8.4</i></b>

	<table class="wikitable">		<table class="wikitable">
Line 26:		Line 26:
	<td>8.2</td>		<td>8.2</td>
	<td>8.3</td>		<td>8.3</td>
			<td>8.4</td>
	</tr>		</tr>
	<tr>		<tr>
Line 47:		Line 48:
	<td>2016.5</td>		<td>2016.5</td>
	<td>2016.7</td>		<td>2016.7</td>
			<td>2018.2</td>
	</tr>		</tr>
	</table>		</table>

Bao: /* UniKey Drive Init Tool */

2016-07-28T05:05:39Z

UniKey Drive Init Tool

← Older revision		Revision as of 16:05, 28 July 2016
Line 1:		Line 1:
	[[category:UniKey Manuals]]		[[category:UniKey Manuals]]
	==<b>UniKey Drive Init Tool</b>==		==<b>UniKey Drive Init Tool</b>==
	~~'''''~~Please note that this section is only for the UniKey Drive.~~'''''~~		<b><em>Please note that this section is only for the UniKey Drive.</em></b>

	<b><i>Version 8.3</i></b>		<b><i>Version 8.3</i></b>

Bao: Updated page to newest version

2016-07-28T01:38:23Z

Updated page to newest version

Show changes

Bao: Added to UniKey Manuals category

2016-07-27T06:00:32Z

Added to UniKey Manuals category

← Older revision		Revision as of 17:00, 27 July 2016
Line 1:		Line 1:
	[[category:~~UniKey_Tools~~]]		[[category:UniKey Manuals]]
	:''Note: UniKey Drive only.''		:''Note: UniKey Drive only.''

Joseph at 07:06, 28 September 2012

2012-09-28T07:06:28Z

← Older revision		Revision as of 18:06, 28 September 2012
Line 32:		Line 32:
	After a UniKey Drive device is plugged in, clicking the [Init] button will begin the initialization process and will format the UniKey Drive to preconfigured settings.		After a UniKey Drive device is plugged in, clicking the [Init] button will begin the initialization process and will format the UniKey Drive to preconfigured settings.

	Warning: All data on the device is deleted during initialization.		:Warning: All data on the device is deleted during initialization.

	:'''Important''': Do not remove the UniKey device until initialization has completed! Failure to do so may render the device inoperable.		:'''Important''': Do not remove the UniKey device until initialization has completed! Failure to do so may render the device inoperable.

Joseph: /* Settings */

2012-09-28T05:42:04Z

Settings

← Older revision		Revision as of 16:42, 28 September 2012
Line 13:		Line 13:
	* To set the contents of the Virtual CD-ROM drive, select the desired .iso to be loaded onto the read-only partition in the [Virtual CD (ISO File)] option. A default .iso image is provided within the same folder at the Init tool in the SDK, containing the UniKey Drive Entry tool "Entry.exe", used for gaining access to the password-protected partition.<br>Please note that an .iso image must be provided to initialise the UniKey Drive device.		* To set the contents of the Virtual CD-ROM drive, select the desired .iso to be loaded onto the read-only partition in the [Virtual CD (ISO File)] option. A default .iso image is provided within the same folder at the Init tool in the SDK, containing the UniKey Drive Entry tool "Entry.exe", used for gaining access to the password-protected partition.<br>Please note that an .iso image must be provided to initialise the UniKey Drive device.
	* The size of the Hidden Drive has can be specified under the [Hidden Drive] option, a value between 1 to 1023 in megabytes. This partition is not accessible by any means other than pre-programmed commands using the UniKey Drive API.		* The size of the Hidden Drive has can be specified under the [Hidden Drive] option, a value between 1 to 1023 in megabytes. This partition is not accessible by any means other than pre-programmed commands using the UniKey Drive API.
	* The General/Protected Drive Physical Capacity slider provides selection over the amount of space allocated to either partition. The normal parition (general drive) is openly accessible, whereas the password-protected partition (protected drive) requires the correct password entered into the Entry tool to access it.		* The General/Protected Drive Physical Capacity slider provides selection over the amount of space allocated to either partition. The normal parition (general drive) is openly accessible, whereas the password-protected partition (protected drive) requires the correct password entered into the [[UniKey Entry Tool\|Entry tool]] to access it.
	* Setting the password of the password-protected partition can be done in the [Secure Password] fields.		* Setting the password of the password-protected partition can be done in the [Secure Password] fields.

Joseph at 05:35, 28 September 2012

2012-09-28T05:35:49Z

← Older revision		Revision as of 16:35, 28 September 2012
Line 1:		Line 1:
	[[category:UniKey_Tools]]		[[category:UniKey_Tools]]
			:''Note: UniKey Drive only.''

	~~'''~~UniKey Drive ~~Initialization tool''' is used to manage the storage size of the four partitions of UniKey Drive as well as saving tools to the Virtual CD-ROM drive.~~		== UniKey Drive Init Tool ==

	~~[[Image:UniKey_Init_Tool_Pic01~~.~~jpg]]~~		The UniKey Drive Initialization tool is used to set the parameters of and initialise a UniKey Drive device. With the Init tool, settings which can be configured include the size of the general (normal) partition, the size of the password-protected partition, the size and password of the hidden partition and the contents of the read-only partition. These settings can be initialized to one or multiple UniKey Drive devices.

	~~'''~~Settings~~'''~~		=== Settings ===

	In the ~~settings~~ tab, ~~a software vendor has~~ the ~~ability to~~ set the partition ~~size of~~ UniKey Drive and ~~set which~~ .iso ~~image to use for the CD~~-~~ROM emulation.~~		In the "Settings" tab, the user can set the partition sizes within UniKey Drive, contents of VCD partition and the password of the password-protected partition.
			<!--Note that sizes of the partitions affected by size of .iso file-->

	• To set Virtual CD-ROM drive ~~emulation please enter~~ the ~~location~~ of the ~~desired file or use~~ the ~~button next~~ to the ~~text box~~.		* To set the contents of the Virtual CD-ROM drive, select the desired .iso to be loaded onto the read-only partition in the [Virtual CD (ISO File)] option. A default .iso image is provided within the same folder at the Init tool in the SDK, containing the UniKey Drive Entry tool "Entry.exe", used for gaining access to the password-protected partition.<br>Please note that an .iso image must be provided to initialise the UniKey Drive device.
			* The size of the Hidden Drive has can be specified under the [Hidden Drive] option, a value between 1 to 1023 in megabytes. This partition is not accessible by any means other than pre-programmed commands using the UniKey Drive API.
			* The General/Protected Drive Physical Capacity slider provides selection over the amount of space allocated to either partition. The normal parition (general drive) is openly accessible, whereas the password-protected partition (protected drive) requires the correct password entered into the Entry tool to access it.
			* Setting the password of the password-protected partition can be done in the [Secure Password] fields.

	Please note that you must have an image loaded, all 4 partitions must be created. In the directory with the Init tool launcher, a sample .iso image is provided which contains an autorun.inf and the UniKey Drive Entry tool.		[[Image:UniKey_Init_Tool_Pic01.jpg]]

	~~• The Hidden Drive partition is~~ the ~~area used~~ to ~~store sensitive data~~. ~~This area is not accessible~~ by ~~any means other than pre-programmed commands using the API~~.		To clear all settings back to the default, click on [Reset]. Current settings can be saved to a .ini file by clicking [Save], and can be later loaded through [Load].

	~~• General/Protected drive physical capacity slider allows control over~~ the ~~available space the end user has access~~ to ~~on the UniKey Drive~~.		All fields must be specified and valid, and a valid .iso image must be given in the Virtual CD-ROM option for initialization to be successful. A error message will appear if settings have not been configured correctly.

	~~Please note that the Protected drive requires a password to log into, whilst the general drive is accessible to anyone.~~		=== Initing ===

	~~• Secure password input is required to make any changes to~~ the UniKey.		After settings have been configured in the "Settings" tab, configured settings can be initialized onto the UniKey Drive from the "Initing" tab.

	To clear all your setting changes back to the default, please click on the Reset button. The Save button creates a .ini file with the configurations made above, Load allows you to load a previously made settings.		[[Image:UniKey_Init_Tool_Pic02.jpg]]

	~~All fields must have be filled and valid~~, the ~~Virtual CD-ROM must have an image file~~, ~~a warning message will be displayed if a field is not filled~~.		To initialise multiple UniKey Drive devices with the same settings, tick the [In batch] box, otherwise leave the option unchecked to only initialize one device.

	~~'''Initing'''~~		After a UniKey Drive device is plugged in, clicking the [Init] button will begin the initialization process and will format the UniKey Drive to preconfigured settings.

	~~The Initing tab~~ is ~~used for initializing/burning the UniKey Drive to the settings made in the Settings tab.~~		Warning: All data on the device is deleted during initialization.

	~~[[Image:UniKey_Init_Tool_Pic02~~.~~jpg]]~~

	~~Please tick~~ the ~~In batch button~~ to ~~create multiple copies of the same settings on multiple UniKey Drives. The Init button starts~~ the ~~burn process, this process will format your UniKey Drive~~.		:'''Important''': Do not remove the UniKey device until initialization has completed! Failure to do so may render the device inoperable.

	~~The progress bar shows~~ the ~~burning process percentage~~, ~~and the Progress box provides details about~~ the ~~current operation~~.		Once the Progress window outputs "Initialized successfully", the UniKey Drive device can be safely removed.

	~~Once the Progress box outputs: Initialized successfully!. It is safe to remove the UniKey Drive.~~		If the [In batch] option is ticked, the following popup will appear.
	If the In batch option is ticked, the following ~~pop up~~ will appear.

	[[Image:UniKey_Init_Tool_Pic03.jpg]]		[[Image:UniKey_Init_Tool_Pic03.jpg]]

	~~Please~~ insert the next UniKey Drive, ~~it is now safe for you to remove the previous UniKey Drive~~.		Remove and insert the next UniKey Drive as needed, clicking [Cancel] when finished.

	~~'''~~Record~~'''~~		=== Record ===

	In the Record tab, initialization ~~details~~ are chronologically listed and a Print ~~button is provided for your own records~~.		In the "Record tab", initialization logs are chronologically listed and can be printed with [Print].