View source for UniMate USB PKCS 11 Manual

[[category:UniMate Manuals]]

<div id = "Table of Contents"></div>
==<b>PKCS#11 Manual</b>==

<b><i>Version 2.0</i></b>

<table class="wikitable">
 <tr>
  <td style="background-color: red;"><b style="color: #fff;">Version</b></td>
  <td style="background-color: red;"><b style="color: #fff;">Date</b></td>
 </tr>
 <tr>
  <td>1.0</td>
  <td>2015.7</td>
 </tr>
 <tr>
  <td>2.0</td>
  <td>2016.7</td>
 </tr>
</table>

The data and information contained in this document cannot be altered without the express written permission of SecuTech Solution Inc. No part of this document can be reproduced or transmitted for any purpose whatsoever, either by electronic or mechanical means.

The general terms of trade of SecuTech Solution Inc. apply. Diverging agreements must be made in writing.

Copyright SecuTech Solution Inc. All rights reserved.

WINDOWS is a registered trademark of Microsoft Corporation.

The WINDOWS-logo is a registered trademark <sup>(TM)</sup> of Microsoft Corporation. 

<b>Software License</b>

The software and the enclosed documentation are copyright-protected. By installing the software, you agree to the conditions of the licensing agreement.

<b>Licensing Agreement</b>

SecuTech Solution Inc. (SecuTech for short) gives the buyer the simple, exclusive and non-transferable licensing right to use the software on one individual computer or networked computer system (LAN). Copying and any other form of reproduction of the software in full or in part as well as mixing and linking it with others is prohibited. The buyer is authorized to make one single copy of the software as backup. SecuTech reserves the right to change or improve the software without notice or to replace it with a new development. SecuTech is not obliged to inform the buyer of changes, improvements or new developments or to make these available to him. A legally binding promise of certain qualities is not given. SecuTech is not responsible for damage unless it is the result of deliberate action or negligence on the part of SecuTech or its aids and assistants. SecuTech accepts no responsibility of any kind for indirect, accompanying or subsequent damage.

<b>Contact Information</b>

<b>Web: </b>http://www.esecutech.com

<b>Email: </b>[mailto:sales@eSecuTech.com sales@esecutech.com]

Please Email any comments, suggestions or questions regarding this document or our products to us at: [mailto:sales@eSecuTech.com sales@esecutech.com]

<br>
; CE Attestation of Conformity
[[File:CE Attestation.png|left|100px|top]]
: UniMate is in conformity with the protection requirements of CE Directives 89/336/EEC Amending Directive 92/31/EEC. UniMate satisfies the limits and verifying methods: EN55022/CISPR 22 Class B, EN55024: 1998.
<br><br><br>
; FCC Standard
[[File:FCC.png|left|100px|top]]
: This device is in conformance with Part 15 of the FCC Rules and Regulation for Information Technology Equipment.
: Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
<br><br><br>
[[File:USB Logo.png|left|100px|top]] The equipment of UniMate is USBbased.
<br><br><br>
; Conformity to ISO 9001<nowiki>:</nowiki>2000
[[File:ISO 9001.png|left|100px|top]]
: The Quality System of SecuTech Solution Inc., including its implementation, meets the requirements of the standard ISO 9001:2000
<br><br><br>
; ROHS
[[File:ROHS.png|left|100px|top]]
: All UniMate products are environmentally friendly with ROHS certificates.
<br><br><br><br>

<div style="page-break-before:always"></div>

==Introduction==
PKCS#11 is a Public-Key Cryptography Standard (PKCS) for public key cryptography, developed by RSA Laboratories and includes both algorithm-specific and algorithm-independent implementation standards. It is an industry standard that defines a technology independent programming interface for cryptographic devices such as smart cards and PCMCIA cards. This standard specifies an application program interface
(API) called Cryptoki (Cryptographic Token Interface), to devices, either physical or virtual, which hold cryptographic information (keys and other data) and perform cryptographic functions. This API is used across many platforms and is powerful enough for most security-related applications. SecuTech uses PKCS#11 as the main API for UniMate programming. UniMate supports PKCS#11 applications via UniMate middleware. 

The following files are needed when developing UniMate PKCS#11 applications: 

<table class="wikitable">
 <tr>
  <td style="background-color: red;"><b style="color: #fff;">Files</b></td>
  <td style="background-color: red;"><b style="color: #fff;">Path</b></td>
 </tr>
 <tr>
  <td>Cryptoki.h</td>
  <td>Provided by RSA</td>
 </tr>
 <tr>
  <td>pkcs11.h</td>
  <td>Provided by RSA</td>
 </tr>
 <tr>
  <td>Pkcs11f.h</td>
  <td>Provided by RSA</td>
 </tr>
 <tr>
  <td>Pkcs11t.h/td>
  <td>Provided by RSA</td>
 </tr>
 <tr>
  <td>UniMateP11.dll / UniMateP11.so</td>
  <td>SDK\PKCS#11\Libraries\</td>
 </tr>
</table>

The PKCS#11 module of UniMate supports the creation of the following objects: 

<table class="wikitable">
 <tr>
  <td style="background-color: red;"><b style="color: #fff;">Object Class</b></td>
  <td style="background-color: red;"><b style="color: #fff;">Description</b></td>
 </tr>
 <tr>
  <td><b>CKO_DATA</b></td>
  <td>For data structures defined by the application</td>
 </tr>
 <tr>
  <td><b>CKO_SECRET_KEY</b></td>
  <td>For symmetric keys</td>
 </tr>
 <tr>
  <td><b>CKO_CERTIFICATE</b></td>
  <td>For X.509 v3 certificates</td>
 </tr>
 <tr>
  <td><b>CKO_PUBLIC_KEY</b></td>
  <td>For RSA/DSA public key</td>
 </tr>
 <tr>
  <td><b>CKO_PRIVATE_KEY</b></td>
  <td>For RSA/DSA private key</td>
 </tr>
</table>

All the objects listed in the above table can be created with UniMate. The secure storage in UniMate is limited, so objects can only be created in memory but can NOT be stored in the UniMate secure storage. Only encryption keys and permanently present data need to be saved in the UniMate.

<div style="page-break-before:always"></div>

==Supported PKCS#11 Algorithms and API== 

<table class="wikitable" >
 <tr>
  <td style="background-color: red;"><b style="color: #fff;">Algorithm</b></td>
  <td style="background-color: red;"><b style="color: #fff;">Encrypt/Decrypt</b></td>
  <td style="background-color: red;"><b style="color: #fff;">Sign/Verify</b></td>
  <td style="background-color: red;"><b style="color: #fff;">Digest</b></td>
  <td style="background-color: red;"><b style="color: #fff;">Generate key/pair</b></td>
 </tr>
 <tr>
  <td><b>CKM_RSA_PKCS_KEY_PAIR_GEN</b></td>
  <td></td>
  <td></td>
  <td></td>
  <td>&#8730;</td>
 </tr>
 <tr>
  <td><b>CKM_RSA_PKCS</b></td>
  <td>&#8730;</td>
  <td>&#8730;</td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_DSA_KEY_PAIR_GEN</b></td>
  <td></td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_DSA</b></td>
  <td></td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_RC2_KEY_GEN</b></td>
  <td></td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_RC2_ECB</b></td>
  <td></td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_RC2_CBC</b></td>
  <td></td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_RC2_CBC_PAD</b></td>
  <td></td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_RC4_KEY_GEN</b></td>
  <td></td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_RC4</b></td>
  <td></td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_DES_KEY_GEN</b></td>
  <td></td>
  <td></td>
  <td></td>
  <td>&#8730;</td>
 </tr>
 <tr>
  <td><b>CKM_DES_ECB</b></td>
  <td>&#8730;</td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_DES_CBC</b></td>
  <td>&#8730;</td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_DES3_KEY_GEN</b></td>
  <td></td>
  <td></td>
  <td></td>
  <td>&#8730;</td>
 </tr>
 <tr>
  <td><b>CKM_DES3_ECB</b></td>
  <td>&#8730;</td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_DES3_CBC</b></td>
  <td>&#8730;</td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_DES3_CBC_PAD</b></td>
  <td>&#8730;</td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_MD2</b></td>
  <td></td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_MD5</b></td>
  <td></td>
  <td></td>
  <td>&#8730;</td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_SHA_1</b></td>
  <td></td>
  <td></td>
  <td>&#8730;</td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_DH_PKCS_KEY_PAIR_GEN</b></td>
  <td></td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_AES_KEY_GEN</b></td>
  <td></td>
  <td></td>
  <td></td>
  <td>&#8730;</td>
 </tr>
 <tr>
  <td><b>CKM_AES_CBC</b></td>
  <td>&#8730;</td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
 <tr>
  <td><b>CKM_AES_ECB</b></td>
  <td>&#8730;</td>
  <td></td>
  <td></td>
  <td></td>
 </tr>
</table>

The table below lists all of the key sizes in the UniMate PKCS#11 library: 

<table class="wikitable">
 <tr>
  <td style="background-color: red;"><b style="color: #fff;">Algorithms</b></td>
  <td style="background-color: red;"><b style="color: #fff;">Key Sizes</b></td>
 </tr>
 <tr>
  <td><b>CKM_RSA_PKCS_KEY_PAIR_GEN</b></td>
  <td>1024bits, 2048bits</td>
 </tr>
 <tr>
  <td><b>CKM_DES_KEY_GEN</b></td>
  <td>64 bits</td>
 </tr>
 <tr>
  <td><b>CKM_DES3_KEY_GEN</b></td>
  <td>192 bits</td>
 </tr>
 <tr>
  <td><b>CKM_AES_KEY_GEN</b></td>
  <td>128 &#65374; 256 bits</td>
 </tr>
</table>


[[#Table of Contents|CONTENTS]]

<div style="page-break-before:always"></div>

==UniMate PKCS#11 Function Library==
The UniMate PKCS#11 library only implements the standard PKCS#11 APIs. Any other APIs beyond PKCS#11 are not implemented. If such an API is called, an error return code such as CKR_FUNCTION_NO_SUPPORT will be returned. 

<table class="wikitable">
 <tr>
  <td style="background-color: red;"><b style="color: #fff;">Category</b></td>
  <td style="background-color: red;"><b style="color: #fff;">Function</b></td>
  <td style="background-color: red;"><b style="color: #fff;">Supported</b></td>
 </tr>
 <tr>
  <td rowspan="4"><b>General Purpose Function</b></td>
  <td>C_Initialize</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_Finalize</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_GetInfo</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_GetFunctionList</td>
  <td>YES</td>
 </tr>
 <tr>
  <td rowspan="9"><b>Slot and UniMate Management<br>Function</b></td>
  <td>C_GetSlotList</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_GetSlotInfo</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_GetUniMateInfo</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_WaitForSlotEvent</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_GetMechanismList</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_GetMechanismInfo</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_InitUniMate</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_InitPIN</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_SetPIN</td>
  <td>YES</td>
 </tr>
 <tr>
  <td rowspan="8"><b>Session Management Function</b></td>
  <td>C_OpenSession</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_CloseSession</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_CloseAllSessions</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_GetSessionInfo</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_GetOperationState</td>
  <td>NO</td>
 </tr>
 <tr>
  <td>C_SetOperationState</td>
  <td>NO</td>
 </tr>
 <tr>
  <td>C_Login</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_Logout</td>
  <td>YES</td>
 </tr>
 <tr>
  <td rowspan="9"><b>Object Management Function</b></td>
  <td>C_CreateObject</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_CopyObject</td>
  <td>NO</td>
 </tr>
 <tr>
  <td>C_DestroyObject</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_GetObjectSize</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_GetAttributeValue</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_SetAttributeValue</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_FindObjectsInit</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_FindObjects</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_FindObjectsFinal</td>
  <td>YES</td>
 </tr>
 <tr>
  <td rowspan="4"><b>Encryption Function</b></td>
  <td>C_EncryptInit</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_Encrypt</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_EncryptUpdate</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_EncryptFinal</td>
  <td>YES</td>
 </tr>
</table>

<div style="page-break-before:always"></div>

<table class="wikitable">
 <tr>
  <td style="background-color: red;"><b style="color: #fff;">Category</b></td>
  <td style="background-color: red;"><b style="color: #fff;">Function</b></td>
  <td style="background-color: red;"><b style="color: #fff;">Supported</b></td>
 </tr>
 <tr>
  <td rowspan="4"><b>Decryption Function</b></td>
  <td>C_DecryptInit</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_Decrypt</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_DecryptUpdate</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_DecryptFinal</td>
  <td>YES</td>
 </tr>
 <tr>
  <td rowspan="5"><b>Message Digesting Function</b></td>
  <td>C_DigestInit</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_Digest</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_DigestUpdate</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_DigestKey</td>
  <td>NO</td>
 </tr>
 <tr>
  <td>C_DigestFinal</td>
  <td>YES</td>
 </tr>
 <tr>
  <td rowspan="6"><b>Signing and Hashing Function<br>(MAC)</b></td>
  <td>C_SignInit</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_Sign</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_SignUpdate</td>
  <td>NO</td>
 </tr>
 <tr>
  <td>C_SignFinal</td>
  <td>NO</td>
 </tr>
 <tr>
  <td>C_SignRecoverInit</td>
  <td>NO</td>
 </tr>
 <tr>
  <td>C_SignRecover</td>
  <td>NO</td>
 </tr>
 <tr>
  <td rowspan="6"><b>Functions for Verifying<br>Signatures and Hashing (MAC)</b></td>
  <td>C_VerifyInit</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_Verify</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_VerifyUpdate</td>
  <td>NO</td>
 </tr>
 <tr>
  <td>C_VerifyFinal</td>
  <td>NO</td>
 </tr>
 <tr>
  <td>C_VerifyRecoverInit</td>
  <td>NO</td>
 </tr>
 <tr>
  <td>C_VerifyRecover</td>
  <td>NO</td>
 </tr>
 <tr>
  <td rowspan="4"><b>Dual-Purpose Cryptographic<br>Function</b></td>
  <td>C_DigestEncryptUpdate</td>
  <td>NO</td>
 </tr>
 <tr>
  <td>C_DecryptDigestUpdate</td>
  <td>NO</td>
 </tr>
 <tr>
  <td>C_SignEncryptUpdate</td>
  <td>NO</td>
 </tr>
 <tr>
  <td>C_DecryptVerifyUpdate</td>
  <td>NO</td>
 </tr>
 <tr>
  <td rowspan="5"><b>Key Management Function</b></td>
  <td>C_GenerateKey</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_GenerateKeyPair</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_WrapKey</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_UnwrapKey</td>
  <td>YES</td>
 </tr>
 <tr>
  <td>C_DeriveKey</td>
  <td>NO</td>
 </tr>
 <tr>
  <td rowspan="2"><b>Random Number Generation<br>Function</b></td>
  <td>C_SeedRandom</td>
  <td>NO</td>
 </tr>
 <tr>
  <td>C_GenerateRandom</td>
  <td>YES</td>
 </tr>
 <tr>
  <td><b>Callback Function</b></td>
  <td></td>
  <td>YES</td>
 </tr>
</table>


[[#Table of Contents|CONTENTS]]

<div style="page-break-before:always"></div>

==Samples==
All the samples are implemented in C, and they all support PKCS#11 standard v.2.20. The samples are provided in: <code>SDK\PKCS#11\Sample</code>

<table class="wikitable">
 <tr>
  <td style="background-color: red;"><b style="color: #fff;">Function</b></td>
  <td style="background-color: red;"><b style="color: #fff;">Description</b></td>
 </tr>
 <tr>
  <td><b>C_Initialize</b></td>
  <td>Initialize the PKCS#11 library</td>
 </tr>
 <tr>
  <td><b>C_GetSlotList</b></td>
  <td>Get the slot list</td>
 </tr>
 <tr>
  <td><b>C_OpenSession</b></td>
  <td>Open a session</td>
 </tr>
 <tr>
  <td><b>C_Login</b></td>
  <td>Log in</td>
 </tr>
 <tr>
  <td><b>C_InitPIN</b></td>
  <td>Initialize user PIN</td>
 </tr>
 <tr>
  <td><b>C_Logout</b></td>
  <td>Log out</td>
 </tr>
 <tr>
  <td><b>C_FindObjectsInit</b></td>
  <td>Initialize the search for any object</td>
 </tr>
 <tr>
  <td><b>C_FindObjects</b></td>
  <td>Find the objects which match</td>
 </tr>
 <tr>
  <td><b>C_FindObjectsFinal</b></td>
  <td>Cleanup the search</td>
 </tr>
 <tr>
  <td><b>C_CloseSession</b></td>
  <td>Close a session</td>
 </tr>
 <tr>
  <td><b>C_GetAttributeValue</b></td>
  <td>Get the attribute value</td>
 </tr>
 <tr>
  <td><b>C_Finalize</b></td>
  <td>Close PKCS #11 library</td>
 </tr>
 <tr>
  <td><b>C_GenerateKeyPair</b></td>
  <td>Generate a new public/private key pair</td>
 </tr>
 <tr>
  <td><b>C_GenerateKey</b></td>
  <td>Generate a secret key</td>
 </tr>
 <tr>
  <td><b>C_WrapKey</b></td>
  <td>Wrap (encrypt) a key</td>
 </tr>
 <tr>
  <td><b>C_UnwrapKey</b></td>
  <td>Unwrap (decrypt) a key</td>
 </tr>
 <tr>
  <td><b>C_DeriveKey</b></td>
  <td>Derive a key from a base key</td>
 </tr>
 <tr>
  <td><b>C_SetPIN</b></td>
  <td>Modify the current users PIN</td>
 </tr>
 <tr>
  <td><b>C_GetTokenInfo</b></td>
  <td>Get the slot information</td>
 </tr>
 <tr>
  <td><b>C_SignInit</b></td>
  <td>Initialize a signature</td>
 </tr>
 <tr>
  <td><b>C_Sign</b></td>
  <td>Sign data</td>
 </tr>
 <tr>
  <td><b>C_SignUpdate</b></td>
  <td>Continue a multiple-part signature</td>
 </tr>
 <tr>
  <td><b>C_SignFinal</b></td>
  <td>Finish a multiple-part signature</td>
 </tr>
 <tr>
  <td><b>C_SignRecoverInit</b></td>
  <td>Initialize a signature</td>
 </tr>
 <tr>
  <td><b>C_SignRecover</b></td>
  <td>Sign data, where the data can be recovered from the signature</td>
 </tr>
 <tr>
  <td><b>C_DestroyObject</b></td>
  <td>Destroy an object</td>
 </tr>
 <tr>
  <td><b>C_GetFunctionList</b></td>
  <td>Return the function list</td>
 </tr>
 <tr>
  <td><b>C_GetMechanismList</b></td>
  <td>Obtain a list of mechanism types</td>
 </tr>
 <tr>
  <td><b>C_GetMechanismInfo</b></td>
  <td>Obtain information about a particular mechanism possibly supported by a token</td>
 </tr>
 <tr>
  <td><b>C_InitToken</b></td>
  <td>Initialize a token</td>
 </tr>
 <tr>
  <td><b>C_GetSessionInfo</b></td>
  <td>Obtain information about the session</td>
 </tr>
 <tr>
  <td><b>C_GetOperationState</b></td>
  <td>Obtain the cryptographic state of a session</td>
 </tr>
 <tr>
  <td><b>C_SetOperationState</b></td>
  <td>Restore the cryptographic state of a session</td>
 </tr>
 <tr>
  <td><b>C_EncryptInit</b></td>
  <td>Initialize an encryption operation</td>
 </tr>
 <tr>
  <td><b>C_Encrypt</b></td>
  <td>Encrypt single-part data</td>
 </tr>
 <tr>
  <td><b>C_EncryptUpdate</b></td>
  <td>Continue a multiple-part encryption</td>
 </tr>
 <tr>
  <td><b>C_EncryptFinal</b></td>
  <td>Finish a multiple-part encryption operation</td>
 </tr>
 <tr>
  <td><b>C_DecryptInit</b></td>
  <td>Initialize a decryption</td>
 </tr>
 <tr>
  <td><b>C_Decrypt</b></td>
  <td>Decrypt encrypted data in a single part</td>
 </tr>
 <tr>
  <td><b>C_DecryptUpdate</b></td>
  <td>Continue a multiple-part decryption</td>
 </tr>
 <tr>
  <td><b>C_DecryptFinal</b></td>
  <td>Finish a multiple-part decryption</td>
 </tr>
 <tr>
  <td><b>C_DigestInit</b></td>
  <td>Initialize a message-digesting operation.</td>
 </tr>
 <tr>
  <td><b>C_Digest</b></td>
  <td>Digest data in a single part</td>
 </tr>
 <tr>
  <td><b>C_DigestUpdate</b></td>
  <td>Continue a multiple-part message-digesting</td>
 </tr>
 <tr>
  <td><b>C_DigestFinal</b></td>
  <td>Finish a multiple-part message-digesting</td>
 </tr>
 <tr>
  <td><b>C_VerifyInit</b></td>
  <td>Initialize a verification</td>
 </tr>
 <tr>
  <td><b>C_Verify</b></td>
  <td>Verify a signature</td>
 </tr>
 <tr>
  <td><b>C_VerifyUpdate</b></td>
  <td>Continue a multiple-part verification</td>
 </tr>
 <tr>
  <td><b>C_VerifyFinal</b></td>
  <td>Finish a multiple-part verification</td>
 </tr>
 <tr>
  <td><b>C_VerifyRecoverInit</b></td>
  <td>Initialize a signature verification</td>
 </tr>
 <tr>
  <td><b>C_VerifyRecover</b></td>
  <td>Verify a signature, where the data is recovered from the signature</td>
 </tr>
 <tr>
  <td><b>C_SeedRandom</b></td>
  <td>Mix additional seed material into the token's random number generator</td>
 </tr>
 <tr>
  <td><b>C_GenerateRandom</b></td>
  <td>Generate random data</td>
 </tr>
 <tr>
  <td><b>C_GetFunctionStatus</b></td>
  <td>Obtain an updated status of a function running in parallel with an application</td>
 </tr>
 <tr>
  <td><b>C_CancelFunction</b></td>
  <td>Cancel a function</td>
 </tr>
 <tr>
  <td><b>C_WaitForSlotEvent</b></td>
  <td>Wait for a slot event to occur</td>
 </tr>
</table>

<div style="page-break-before:always"></div>

<br>
If you have any questions, please feel free to contact us at: http://www.esecutech.com/support or [mailto:support@esecutech.com support@esecutech.com]

<br>
{| style="border-style: solid; border-width: 1px;" align="center"
|
<gallery class="center" mode="nolines" widths=175px heights=50px caption="Follow Us!">
File:Twitter.png|'''[https://twitter.com/eSecuTech Twitter]'''
File:Facebook.png|'''[https://www.facebook.com/eSecuTech/ Facebook]'''
File:YouTube.png|'''[https://www.youtube.com/user/esecutech YouTube]'''
File:Linked In.png|'''[https://ca.linkedin.com/in/secutech-solutions-inc-39110b25 LinkedIn]'''
</gallery>
|}

<br><br>
[[File:Footer Logo List.png|left]]
<br><br><br>
<b style="color: #CC0000; font-size: 125%;">About SecuTech</b>

SecuTech Solution Inc. is a company specializing in data protection and strong authentication, providing total customer satisfaction in security systems &amp; services for banks, financial institutions &amp; other industries. Having extensive and in-depth experience within the information security market, SecuTech has drawn upon this experience to utilize today's cutting-edge technologies that are effective against increasingly sophisticated cyber attacks. Enabling enterprises, financial institutions, and government to safely adopt the economic benefits of mobile and cloud computing.

<b>http://www.esecutech.com<br>SecuTech Solution Inc.</b>

{| class="wikitable"
|+ style="text-align:left;" | Contact Us:
! 
! scope="col"| North America
! scope="col"| China
! scope="col"| Asia-Pacific
! scope="col"| EMEA
|-
! scope="row"| Address
| 1250 Boulevard Ren-Lvesque Ouest, #2200, Montreal, QC, H3B 4W8, Canada
| Level 12, #67 Bei Si Huan Xi Lu, Beijing, China, 100080
| Suite 5.14, 32 Delhi Rd, North Ryde, NSW, 2113, Australia
| 4 Cours Bayard 69002 Lyon, France
|-
! scope="row"| Phone
| +1 -888-259-5825
| +8610-8288 8834
| 00612-9888 6185
| +33-042-600-2810
|-
! scope="row"| Fax
| +1 -888-259-5825 ext.0
| +8610-8288 8834
| 00612-9888 6185
| +33-042-600-2810
|-
! scope="row"| Email
| [mailto:info@esecutech.com info@esecutech.com]
| [mailto:cn@esecutech.com cn@esecutech.com]
| [mailto:aus@esecutech.com aus@esecutech.com]
| [mailto:europe@esecutech.com europe@esecutech.com]
|}

<b>Copyright 2012 SecuTech Solution Inc. All rights reserved. Reproduction in whole or in part without written permission from SecuTech is prohibited. SecuTech UniMate and the SecuTech logo are trademarks of SecuTech Inc. Windows and all other trademarks are properties of their respective owners. Features and specifications are subject to change without notice.</b>

[[File:SecuTech Logo.png]]

<br><br>
<b>[[#top|TOP]]</b>