View source for UniKey Drive Init CD ROM Protection Solution

[[category:UniKey Drive Init CD ROM Protection Solution]]


'''UniKey Drive Initialization tool''' is used to manage the storage size of the four partitions of UniKey Drive as well as saving tools to the Virtual CD-ROM drive.


[[Image:UniKey_Init_Tool_Pic01.jpg]]


'''Settings'''


In the settings tab, a software vendor has the ability to set the partition size of UniKey Drive and set which .iso image to use for the CD-ROM emulation.


•	To set Virtual CD-ROM drive emulation please enter the location of the desired file or use the button next to the text box.


Please note that you must have an image loaded, all 4 partitions must be created. In the directory with the Init tool launcher, a sample .iso image is provided which contains an autorun.inf and the UniKey Drive Entry tool.


•	The Hidden Drive partition is the area used to store sensitive data. This area is not accessible by any means other than pre-programmed commands using the API.


•	General/Protected drive physical capacity slider allows control over the available space the end user has access to on the UniKey Drive.


Please note that the Protected drive requires a password to log into, whilst the general drive is accessible to anyone.


•	Secure password input is required to make any changes to the UniKey.


To clear all your setting changes back to the default, please click on the Reset button. The Save button creates a .ini file with the configurations made above, Load allows you to load a previously made settings.


All fields must have be filled and valid, the Virtual CD-ROM must have an image file, a warning message will be displayed if a field is not filled.


'''Initing'''


The Initing tab is used for initializing/burning the UniKey Drive to the settings made in the Settings tab.


[[Image:UniKey_Init_Tool_Pic02.jpg]]


Please tick the In batch button to create multiple copies of the same settings on multiple UniKey Drives. The Init button starts the burn process, this process will format your UniKey Drive.


The progress bar shows the burning process percentage, and the Progress box provides details about the current operation.


Once the Progress box outputs: Initialized successfully!. It is safe to remove the UniKey Drive.
If the In batch option is ticked, the following pop up will appear.


[[Image:UniKey_Init_Tool_Pic03.jpg]]


Please insert the next UniKey Drive, it is now safe for you to remove the previous UniKey Drive.


'''Record'''


In the Record tab, initialization details are chronologically listed and a Print button is provided for your own records.